Vibration Isolation for HVAC Mechanical Equipment, Cooling Pumps and piping
Spring-Flex Mountings
AWRS Series
Up to 5.00" Deflection - 60 - 19,400 lbs Load Range
AWRS Series Isolators combine our open spring mountings within a rugged welded steel housing. The housing is designed to limit equipment motion to 1/4" in all directions due to wind or seismic loads. The AWRS Series is available in sizes that offer up to 5" deflection and can handle loads up to 19,400 lbs per isolator.
Floor Mounted Isolators II
Series: CT
Load Range: 15 - 25,000 lbs.
Steel-housed open spring isolators for 1” to 5” deflection.
Typically used in chillers and cooling tower appliccations
Spring-Flex Mountings
A Series
Up to 5.00" Deflection - 60 - 3680lb Load Range
A Series Spring-Flex mountings are designed to isolate low frequency vibrations in air handling units, fans, chillers, and other HVAC equipment. The A Series are recommended for use directly under most HVAC equipment and in conjunction with structural steel bases and concrete inertia blocks.
The A Series are freestanding spring mountings that are laterally stable. The coils are designed with an excellent ratio between the coil outer diameter and the operating height – ensuring lateral stability. In all the A Series designs, this ratio is a minimum of 0.80” and many have a 1:1 ratio. The coils are built to low operating stresses – providing long mounting life.
The A Series also feature weldless construction. The spring coils are not welded to steel plates that could introduce excessive stress at the weld areas and result in the failure of the springs. Instead, the A Series are assembled to elastomeric cups or to steel plate bases – providing durability and flexibility. The series also include a built-in leveling device for simplified installation. The products incorporate a color-coded steel spring for ease of identification and inspection in the field.
Floor Mounted Isolators IV
Series: RSW
Load Range: 15 - 3,000 lbs.
Recessed open spring isolators for concrete inertia bases sized for 1” and 2” deflection
Spring Isolation Hangers
Series: BS/PBS
Load Range: 15 - 6,400 lbs.
Spring isolation hangers for 1" to 5" deflection.
For equipment or piping.
Spring Isolation Hangers II
Series: BSR/PBSR
Load Range: 15 - 6,400 lbs.
Spring isolation hangers for 1" to 5" deflection.
For equipment or piping.
Spring Isolation Hangers III
Series: BSA/PBSA
Load Range: 15 - 6,400 lbs.
Spring isolation hangers for 1" to 5" deflection and
30° misalignment.
For equipment or piping.
Spring Isolation Hangers IV
Series: BSRA/PBSRA
Load Range: 15 - 6,400 lbs.
Spring isolation hangers for 1" to 5" deflection and
30° misalignment.
For equipment or piping.




